Domestic vs overseas sourcing: where should your custom parts be made?
Domestic sourcing fits custom parts whose drawings still change or carry tight tolerances; nearshore adds a border but keeps road transit and daytime contact; overseas fits frozen designs at volumes that cover tooling and transit. Allied Mile finds manufacturers in the U.S., Canada and Mexico.
The difference
The three regions differ less in what a shop can machine, form or mold than in everything around the part: how fast a question gets answered, who holds the tooling and the drawings, how long a revision takes to reach the floor, and what minimum order quantity (MOQ) and payment terms a shop expects. Location is one filter in a supplier search, and how we narrow a supplier search covers the others; this page is about that one filter, for custom parts. Landed cost and freight are out of scope: both depend on your part, your volume and the month you ship.
Where domestic, nearshore and overseas differ
| Domestic (U.S.) | Nearshore (Canada, Mexico) | Overseas (Asia, Europe) | |
|---|---|---|---|
| Communication and time zones | Same or adjacent time zones, shared language, inch drawings and ASME Y14.5 tolerancing. A morning question is often answered that day; a visit is a drive or short flight. | Usually zero to three hours' offset. English is usual in Canada and common at exporting shops in Mexico. Drawings mix inch and metric, so state units and the tolerancing standard. | Europe is five to nine hours ahead, East Asia close to half a day, so plan on one exchange a day. Metric and ISO 2768 tolerancing are the default; state units and standard. |
| Tooling ownership and transfer | Quoted as separate lines; ownership written into your PO (purchase order). Tooling you own moves to another shop by road, with a new first article. | Same practice. Moving tooling across the border is an export and an import, so name who arranges the paperwork before you need it. | Same practice, in writing. Recovering tooling from a shop you are leaving is slow and sometimes contested, so settle the tooling transfer questions before the first PO. |
| Intellectual property (IP) protection | A non-disclosure agreement (NDA) and a drawings clause in the PO, enforceable in a forum you can reach. For export-controlled drawings, confirm the shop can receive controlled technical data first. | NDAs are enforceable in both countries; have yours reviewed under local law and name governing law and venue. Export-controlled drawings need a license or exemption confirmed before crossing. | Enforcement is slow from the U.S., so protect the design itself: send only the views a shop needs, and split critical features across suppliers. Export-controlled drawings need a license or exemption first. |
| Lead time, including transit | Shop lead time plus days of road transit. Expediting is a phone call, and partial shipments are easy to arrange. | Shop lead time plus road transit and a border crossing cleared by a customs broker. Add days and some variability, not weeks. | Shop lead time plus weeks at sea (or days by air) and customs clearance. A reject found on arrival costs the transit twice, so plan safety stock. |
| MOQ norms | Job shops take small lots. The MOQ follows setup time and the smallest material buy, not policy, so a pilot quantity usually draws a quote. | Similar in job shops. Larger plants built around automotive or appliance programs expect volume and may decline small lots, so match the shop's size to your quantity. | Higher. A small-lot RFQ (request for quote) often comes back as a no-quote or priced for a bigger run; molded and cast parts carry MOQs well above a pilot run. |
| Certification availability | ISO 9001 is common; AS9100 (aerospace), ISO 13485 (medical) and Nadcap special processes are available and can be checked in person. A certificate of conformance (CoC) and material certs are routine. | ISO 9001 is common; AS9100 and ISO 13485 exist in the aerospace and medical clusters. Ask for the certificate with scope and expiry, as you would at home. | ISO 9001 is widely held; sector certificates exist in export-oriented regions. Verify the certificate with the registrar, and agree how material certs will be provided and translated. |
| Revisions after release | A revision is a call and a new drawing; work in progress can often be stopped the same day. Confirm in writing which revision the shop is working to. | Same practice with a short delay. Check what is already in process or on a truck before the change takes effect, and state an effectivity quantity. | Work in progress and parts on the water stay at the old revision, so a change can mean scrap or two revisions in stock. Freeze the drawing before the PO. |
| Payment norms | Net 30 after a credit check is common for established buyers; a new account may be asked for a deposit on tooling or the first order. Invoiced in U.S. dollars. | Net terms once a relationship exists, and deposits on tooling. Quotes may be in U.S. dollars or local currency, so agree the currency and who carries the exchange-rate risk. | Deposit with the order, balance before shipment is the usual start; net terms come with history, letters of credit with larger orders. Bank charges and currency risk sit with you unless agreed. |
| Tariff exposure | None on the finished part. Duty on imported raw material can still reach you through the shop's material cost. | Set by the part's Harmonized Tariff Schedule (HTS) classification and country of origin. Parts meeting USMCA rules of origin may qualify for preferential treatment; trade remedies on specific materials apply regardless. | Duty by HTS classification and country of origin, plus any trade remedy in force: U.S. Customs and Border Protection (CBP) lists Section 232, Section 301, antidumping and countervailing duties. Check both before comparing quotes. |
- Regions are seen from a U.S. buyer's desk. Domestic means the United States; nearshore means Canada and Mexico; overseas means Asia and Europe, which differ from each other more than one column can show.
- Each cell is the usual case for a made-to-print part quoted to a job shop or mid-size plant, not a rule. Suppliers set their own MOQs, lead times, terms and tooling conditions; your PO and contract govern.
- No column describes how we work. The regions are compared as a buyer meets them, whether or not anyone helps with the search.
- Tariff exposure: No rates are given here: they change, and CBP, not the importer, makes the final determination of the rate. The HTS and CBP pages used are listed under Sources.
When each option fits
Domestic (U.S.)
- Drawings are still changing, or you expect more than one revision in the first year.
- Tolerances, finishes or inspection requirements need a conversation, not only a drawing.
- Lots are small or irregular, and you cannot hold safety stock to cover transit.
- Drawings are export-controlled, or your customer's contract has a domestic-content clause.
- You want to walk the shop floor, or put an engineer there for the first article.
Nearshore (Canada, Mexico)
- Volumes have grown past what small job shops want, but the design is not frozen.
- You want a shop you can call during your working day, with road transit to your dock.
- The part goes into a volume program, and you want a region with plants built for such programs.
- You are prepared to document origin for USMCA preferential treatment, or the duty without it is acceptable.
- You want a second source for a domestic part within a day's drive, so tooling can move by road.
Overseas (Asia, Europe)
- The drawing is frozen and the volume covers tooling, MOQs and weeks of transit.
- The part is tooling-heavy (molded, die-cast or stamped) at volumes that justify a dedicated setup.
- You can hold safety stock, and a quality problem found on arrival will not stop your line.
- Someone will qualify the shop in person and check the first lots, and you have budgeted for it.
- Tariff and trade-remedy exposure for the part's classification and country has been checked and priced in.
How would you decide for a machined bracket family at 1,000 a year?
Here's an example: the BRKT-2210 family, six machined brackets with simple fixtures, about 1,000 of each a year, and say the drawing set has been revised twice in the past year. Quoted at 250 / 1,000 / 5,000 pieces so the price curve is visible, the family is the kind of made-to-print work a CNC machine shop quotes from a drawing and a STEP file; what the shop needs in order to quote is on the custom parts sourcing page.
Domestic, the family goes to machine shops as a set. Fixtures are a line on each quote, and your PO says you own them. At 1,000 a year a job shop runs each bracket a few times a year in lots that match your build, so a revision between lots costs little and a datum question is answered the day it is asked.
Nearshore, the same RFQ draws machine shops in Canada and Mexico with much the same lot sizes. You add a customs broker, a few days of transit and the question of whether the brackets qualify for USMCA preferential treatment, which turns on where the material comes from and the work done; ask each shop to state it in the quote. Fixtures can still move by road if you change shops.
Overseas, 1,000 a year of a machined bracket is a small account for a shop built for volume. The RFQ is more likely to come back with an MOQ that puts a year's demand into one or two shipments, so you hold stock, and a revision means parts on the water at the old drawing. Machined parts carry less tooling than molded ones, so the tooling-transfer problem is smaller here than it would be for a casting; the decision turns on revision stability and stock.
With a drawing that moved twice last year and lots matched to your build, the domestic and nearshore columns fit better. Change those two conditions and the answer changes: a drawing stable for a year and volume heading for the 5,000-piece break make the overseas column worth quoting, and the question becomes who qualifies the shop and who holds the stock.
| Factor | Domestic (U.S.) | Nearshore (Canada, Mexico) | Overseas (Asia, Europe) |
|---|---|---|---|
| Two revisions last year | Absorbed between lots; a call and a new drawing | Absorbed with a short delay; check what is in process or on a truck | Parts on the water at the old drawing; freeze the design first |
| Fixtures (quoted separately) | You own them; they move by road if you change shops | You own them; moving them is an export and an import | Ownership in writing; plan as if they may not come back |
| MOQ at 1,000 a year | Normal job-shop work; small lots quoted | Normal for job shops; large plants may decline | Small account; expect an MOQ that batches a year into one or two shipments |
| Lead time and stock | Shop lead time plus days; little safety stock | Shop lead time plus road transit and a crossing; modest safety stock | Shop lead time plus weeks of transit; stock stands in for responsiveness |
| Duty exposure | None on the finished bracket | Check HTS classification and USMCA origin | Check HTS classification and current trade remedies for the country |
| What tips the decision | Design still moving; you want the floor within reach | Volume growing; you want working-hours contact and a border you can plan around | Design frozen; volume heading to the 5,000 break; stock and qualification budgeted |
What you take on in each region
Each region moves work between your desk, the shop and the space in between. None of them removes it.
- Domestic: the smallest buffers and the most direct conversation, paid for in shop capacity that fills quickly when the economy is busy. Qualification is a visit; tooling and drawings stay within reach.
- Nearshore: a border. You become the importer of record or appoint one, you hire a customs broker, you document origin if you claim USMCA treatment, and you learn a second calendar of holidays. In exchange you keep daytime conversation and road transit.
- Overseas: a time zone, a language, an ocean and a customs entry. Qualification happens at a distance, so someone has to travel to verify the shop and check the first lots, and a late lot is covered by stock, not a phone call.
- Everywhere: the PO carries the quality terms, such as first-article inspection (FAI), a CoC and material certs. Your own qualification does not change with geography; the effort to do it does.
Can you split one BOM across regions?
Yes, and many bills of materials (BOMs) end up that way. The lines that favor one region are usually easy to spot: tooling-heavy, stable, high-volume parts on one side; changing, tight-tolerance or low-volume parts on the other.
Sourcing line by line, the way our BOM sourcing page describes, is what makes the split possible: each made-to-print line gets its own RFQ, so a bracket family and a molded housing can be quoted in different regions and compared on their own terms. We run the RFQs for the domestic and nearshore lines; overseas lines you, or whoever you work with there, quote the same way. The cost is more suppliers to keep in step and more than one customs profile.
If you do split, keep a domestic or nearshore second source in view for the overseas lines, and make sure the incumbent's quote states tooling ownership and the revision it was built to, so a move is possible later.
Questions buyers ask
- What counts as nearshore?
- For a U.S. buyer, Canada and Mexico: shops you can reach by road and call during your working day, under USMCA. Some buyers include Central America and the Caribbean. The time-zone and transit points hold there; the trade-agreement points differ, so check the agreement that applies.
- Is domestic always faster?
- No. Shop lead time is set by the shop's backlog, not its address, and a busy U.S. shop can quote longer than a less busy one abroad. What domestic removes is transit and clearance time and the delay in each round of questions, which matter most while the design is still moving.
- What does an RFQ to a non-U.S. shop need that a domestic one doesn't?
- Country of manufacture, the quote currency, where the tooling will live and who owns it, the units and tolerancing standard, how material certificates will be provided, and the delivery point the price is quoted to. What an RFQ package contains covers the fields every RFQ needs; add these for a shop outside the U.S.
Deciding where your parts should be made?
Related pages
- Find a manufacturerHow Allied Mile finds a manufacturer for your part: narrowing by process, material, size, volume and certifications, and what vetting does and doesn't check.
- Second source suppliersHow to qualify a second source for a single-source part with Allied Mile: one RFQ to vetted candidates, tooling ownership and transfer, and first articles.
- Custom parts sourcingCustom parts sourcing from drawings: what each shop needs in the drawing package to quote, what its quote is made of, and how Allied Mile runs the RFQs.